☆☆E2 WETEK/KODİ☆☆ LibreELEC KODI 19 (Kernel 5.x-rc8) @balbes150

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel 20200304

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel 20200311

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200316

LibreELEC-ARM-ALL.arm-9.80-devel-20200316-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200316

LibreELEC-ARM-ALL.arm-9.80-devel-20200316-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch64-9.80-devel

LibreELEC-ARM-ALL.aarch64-9.80-devel 20200316

LibreELEC-ARM-ALL.aarch64-9.80-devel-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200319

LibreELEC-ARM-ALL.arm-9.80-devel-20200319-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200319

LibreELEC-ARM-ALL.arm-9.80-devel-20200319-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch64-9.80-devel

LibreELEC-ARM-ALL.aarch64-9.80-devel 20200320

LibreELEC-ARM-ALL.aarch64-9.80-devel-wetek-play2.img

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...k-play2.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...etek-play2.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm&ALL.aarch64 9.80-devel 20200324

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
31,673
Tepkime puanı
2,023
Puanları
262
Yaş
40
Konum
bursa
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200326

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200331

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch 9.80-devel

LibreELEC-ARM-ALL.aarch 9.80-devel 20200408

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...3-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...45f3-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150


LibreELEC-ARM-ALL.arm 9.80-devel


LibreELEC-ARM-ALL.arm 9.80-devel 20200409


MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar



1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.


Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.


Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.


Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.


Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext


Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.


Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.


Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.


EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch 9.80-devel

LibreELEC-ARM-ALL.aarch 9.80-devel 20200410

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...1-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...fcc1-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200414

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...6-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...1836-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150


LibreELEC-ARM-ALL.aarch 9.80-devel


LibreELEC-ARM-ALL.aarch 9.80-devel 20200415


MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...1836-amlgx.tar


Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...amlgxbb.img.gz



1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.
2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200422

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200425

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...6-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...5996-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.aarch 9.80-devel

LibreELEC-ARM-ALL.aarch 9.80-devel 20200425

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...f-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...263f-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.
 

mehmetkarahanlı

Yönetici
Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
39,120
Tepkime puanı
1,788
Puanları
262
LibreELEC KODI 19 @balbes150
LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm 9.80-devel

LibreELEC-ARM-ALL.arm 9.80-devel 20200508

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...f-amlgx.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...7cdf-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Important information. Starting from the date 20200327, the order of updating the system via the TAR archive
changes. Now all images are divided into two groups (directories on the site) G12 and RK+AW+AML. Each group
has a single TAR file, which is intended for updating all images from this group. I no longer release separate TAR
files for each hardware variant. The TAR file is universal for all models in its group. Expanded the list of images
for initial launch (writing to external media). The amlgxbb image is optimized for models with the s905 chip
(in the future, it will be added to the EMMC installation mode for the s905). Currently supported installation
in eMMC via the GUI is Kodi interface for s905x\s912\s905x2\s922x rk3328\rk3399 H6.

Please note that before installing in eMMC, you must create a full backup of eMMC. this will help in case of problems
during installation, or you can return to the current state of the system in eMMC before performing the installation.
Important. For the installation to work correctly in eMMC, you must update the universal multiboot to the latest
version using the image from which you start the installation, i.e. before starting the installation re-activate the multiboot.

Önemli bilgi. 20200327 tarihinden itibaren, sistemin TAR arşivi üzerinden güncellenme sırası değişir. Şimdi tüm
görüntüler iki gruba (sitedeki dizinler) ayrılmıştır G12 ve RK + AW + AML. Her grup, bu gruptaki tüm görüntüleri
güncellemek üzere tasarlanmış tek bir TAR dosyasına sahiptir. Artık her donanım değişkeni için ayrı TAR dosyaları
yayınlamıyorum. TAR dosyası, grubundaki tüm modeller için evrenseldir. İlk başlatma için görüntü listesi genişletildi
(harici ortama yazma). Amlgxbb görüntüsü s905 çipli modeller için optimize edilmiştir (gelecekte s905 için EMMC
kurulum moduna eklenecektir). Şu anda GUI üzerinden eMMC'de desteklenen kurulum,
s905x \ s912 \ s905x2 \ s922x rk3328 \ rk3399 H6 için Kodi arabirimidir.

EMMC'ye yüklemeden önce eMMC'nin tam bir yedeğini oluşturmanız gerektiğini lütfen unutmayın. bu, kurulum
sırasında sorun olması durumunda yardımcı olur veya kurulumu gerçekleştirmeden önce eMMC'deki sistemin
geçerli durumuna dönebilirsiniz. Önemli. Yüklemenin eMMC'de düzgün çalışması için, yüklemeyi başlattığınız
görüntüyü kullanarak evrensel çoklu önyüklemeyi en son sürüme güncellemeniz gerekir, yani yüklemeye
başlamadan önce çoklu önyüklemeyi yeniden etkinleştirin.