☆☆E2 EMU CCAM☆☆ [EMU] NCam versıon[*ipk]

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 8.3


Ncam V 8.3

30-01-2019-

[powervu] Added support for hash mode 28 -[streamserver] Better audio pid detection, similar to dvbapi (For some stream types, parse the program element descriptors to determine whether the pid is audio or not. This way much lower cpu power will be used (no unnecessary descrambling of other stream types). This is also needed for Rosscrypt1 because the key finding algorithm depends on accurate detection of video and audio pids)


**

NCAM 8.3

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF,

OpenVix, VTI, SatDreamGr, OpenDroid…





 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 8.4


Ncam V 8.4

01-02-2019

-Improvements emu -extended fix for orf global emm -dont disable global emms or set in config blockemm-g = 0 -caid 0x0D96 & 0x0D98



NCAM 8.4

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)
O

penATV, BlackHole, OpenBH, OpenLD, OpenPLi,

OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…



 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 8.8


Ncam V 8.8




  1. -Improvements emu
  2. -clean implementation of the card list
  3. -(rarely used modules are set from default on to default off (no codechange just setup switch))
  4. -fix reset to wrong defaults
  5. -[nemu] Changed function declaration to a more clean way
  6. -[streamserver] Improved Compel algorithm
  7. (Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)



**

NCAM 8.8

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…



 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 8.9


Ncam V 8.9




  1. -New patched
  2. -Fixes some powerVU bugs
  3. -insert hd03 and hd04 atr





NCAM 8.9für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 9.4


Ncam V 9.4

21-03-2019 -[ncam]

Better solution for setting CBC mode for CSA (Instead of hard coding the algo mode in the dvbapi_write_cw(), we now initialize the er->cw_ex variable with the proper value) -Simpler code for the EXTENDED_CW struct -[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()



**************************************

NCAM 9.4

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF,

OpenVix, VTI, SatDreamGr, OpenDroid…


 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 9.5


Ncam V 9.5

02-04-2019 -[powervu] Added support for hash mode 32 -[director] Fixed cw checksum bytes for nano EE -[DVBAPI] 128 bit keys
**************************************

NCAM 9.5

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix,

VTI, SatDreamGr, OpenDroid…



 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 9.6


Ncam 9.6 compiled and patched by marouan & RAED


-[powervu] Added support for modeCW 4 and modeUnmask 4



**************************************

NCAM 9.6

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)


OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF,

OpenVix, VTI, SatDreamGr, OpenDroid…



 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 9.7


Ncam 9.7 compiled and patched by marouan & RAED




  1. -Rework on dvbapi to incrase the amount of descramblers
  2. -Support for DVB-CISSA scrambling algorithm and 16 byte CWs
  3. Get available descramblers in box and BISS2 related changes
  4. * Instead of using a predefined number of descramblers (16 until now).
  5. ncam now gets the exact number of available descramblers in box.
  6. * Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw.
  7. so some checks need to be skipped.
  8. * Cosmetic changes including code refactoring, variable renaming and comment addition to several places.





**************************************

NCAM 9.7


für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi,


OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…



 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa



[SOFTCAM] NCAM 9.8


Ncam 9.8 compiled and patched by marouan & RAED


-Add support dvbcissa-biss2 -Increased max demux to 32 and max filters to 64 -Decreased max ecm pids to 16 and emm pids to 16 -Decreased max stream indices to 8 -[dvbapi] Increased MAX_STREAM_INDICES back to 32 (It should be equal to MAX_STREAM_PIDS or else it creates problems with specific powervu channels. A better solution (with will also result in even lower number of descramblers needed for powervu channels) will be added in the future) -[nemu] Dropped drecrypt & videoguard module (No channel uses it anymore) -fix bug in disablecrccws_only_for

**************************************

NCAM 9.8

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 9.9


Ncam 9.9 compiled and patched by marouan & RAED



  1. [nemu] Pass complete rdr structure to emu_process_ecm()
  2. (Also re-ordered arguments in powervu_ecm())
  3. -remove duplicate debug dump of er->ecm
  4. -fix bug in disablecrccws_only_for also in cacheex
  5. -general disable checksum correction code optimization
  6. -[powervu] Added new method for matching ECM and EMM keys
  7. (Read the wiki for instructions on how to use it: https://github.com/oscam-emu/o…der-new-method—may-2019
  8. This method is based on enigma2 namespace and it is only available for enigma2 and Tvheadend/VDR software for PC. Also, it does not work with stream relay)
  9. -[dvbapi] Fix for stapi, coolapi, etc


**************************************
NCAM 9.9

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF,

OpenVix, VTI, SatDreamGr, OpenDroid…


 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 10.0


Ncam 10.0 compiled and patched by marouan & RAED



  1. -[streamserver + powervu] Use the new key method here as well (We can get the tsid, onid and ens values from the service reference, so this is possible after all) -Cosmetics to log messages


**************************************

NCAM 10.0

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD,OpenPLUS, Rudream,

OpenPLi, OpenHDF, OpenVix, VTI,OpenSPA, OpenESI,OpenVision,

Hyperion PKTEAM, SatDreamGr, OpenDroid, PurE2,EGAMI,

OpenNFR,TeamBlue, OpenMIPS…


 

Bacanak_46

Yönetici
S.Moderatör
Katılım
2 Mar 2017
Mesajlar
25,468
Tepkime puanı
1,165
Puanları
262
Yaş
39
Konum
bursa


[SOFTCAM] NCAM 10.0


Ncam 10.0 compiled and patched by marouan & RAED



  1. -[streamserver + powervu] Use the new key method here as well (We can get the tsid, onid and ens values from the service reference, so this is possible after all) -Cosmetics to log messages


**************************************

NCAM 10.0

für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD,OpenPLUS, Rudream,

OpenPLi, OpenHDF, OpenVix, VTI,OpenSPA, OpenESI,OpenVision,

Hyperion PKTEAM, SatDreamGr, OpenDroid, PurE2,EGAMI,

OpenNFR,TeamBlue, OpenMIPS…